How to deal with the leakage of sewer inspection port?
The current sewer pipes have an inspection port on the pipe, mainly to facilitate maintenance when the pipe is blocked. However, although the inspection port can bring a lot of convenience, it also has a hidden danger. After a long time, the inspection port of the sewer It is prone to water leakage, so how to deal with this kind of problem, the following editor recommends two commonly used maintenance methods.
Treatment method for water leakage at the sewer inspection port one:
You can use glass glue to coat around the broken water pipe, or where the water pipe leaks. After that, don’t rush to use water, wait until the next day to use water, and try to see if the water pipe leak on the balcony is repaired. It shows that the glass glue has bonded the leaking place together. If you encounter such a problem in the future, you can buy some adhesives, glass glue, etc. to solve it.
Treatment method for water leakage at the sewer inspection port two:
If the interface between the sewer inspection port and the sink is loose, just tighten it. You can also use a cloth tape coated with adhesive to wrap it around the interface with the sink, and then do not use this water pipe for drainage. Wait until the next day, if If it is still leaking, and if the water pipe is broken, then you might as well try to replace the water pipe with a new one. In many cases, it is caused by the aging of the water pipe.
E-mail : [email protected]